A coaxial cable splitter will allow you to do this with ease. You can take a coaxial cable from the TV antenna or cable box, connect it to a coaxial cable splitter, and run two separate outputs to your TV sets in different rooms in your house.
However, you want to make sure that the splitter will preserve the signal so that each TV will have strong reception and good picture quality. It'll help you:. Read reviews of different coaxial cable splitters, and what customers are saying,. There are 4 main types of coaxial cable splitters, depending on their functionality or geometry. Basic Coax Cable Splitter: This will consist of a box with one input coax cable and two or more outputs.
This may be needed to hook up a coaxial cable antenna to a TV without a BNC connector the one that takes a coaxial cable. It can also be used for hooking up security cameras. Switch splitters: These are splitters where you can direct where you wish to send the signal.
Here is an example of a switch coaxial splitter by Parts Express. You put the switch into the position of the input that you choose at any particular point. Other such splitters can direct signals from a game controller or DVD player. Vertical cable splitters: These splitters will have the connectors protruding vertically from the top of the housing, rather than from the sides. There may be wiring installations where this type of splitter will conserve space over a horizontal splitter.
Indoor and outdoor use: Take note if your coaxial cable splitter is good for indoor use only, or if it is suitable for outdoor use as well.
Some coaxial cables have special O-rings, to ensure that the connection to the splitter is weatherproof. Use only the number of cables as necessary: One problem with employing a splitter is that it weakens the signal being transmitted. One TV will sap the strength of the signal from the other one. Therefore, you should only use the proper number of output lines from a splitter that are absolutely necessary. The most popular for consumer use are RG6 and RG The RG6 cable has a heavier gauge to the center wire--this gives better signal transfer.
It also has thicker insulation and better shielding. It is primarily for high-bandwidth, high-frequency applications above 50 MHz.
RG59 cable is thinner. It is used in low bandwidth, lower frequency applications such as analog video and Closed Circuit TV installations. If you use more than one type of coaxial cable, make sure that your splitter will accept both types.
This will be compatible with RG-6 and RG cables. Coaxial cable splitters take in a cable signal line and channel it out into multiple signals, typically to a couple of TVs and a high-speed cable internet modem. To watch TV in another room without a cable box, however, that information will have to be mirrored. To achieve that, you can attach a cable splitter between the output of your main cable box and first TV, then run one or more secondary lines to other televisions. The catch: as the descrambling point, the cable box controls everything.
That means all split TVs attached to it will be tuned to the same channel. We all have one. Ideally, the transmitter will have more than one input: one for the cable box signal and one or more for devices such as streaming boxes or Blu-ray players. And boom—you have a multi-screen system with no extra cable boxes or wires.
As with the coaxial cable method, unfortunately, wireless transmitters still give you only a single point of content: the cable box. For more details on setting up a household wireless TV transmitter, including non-cable antenna options, peruse this guide.
The viewing options are fewer, but, hey, you get what you pay for in these post-analog times. Signals traveling through passive splitters degenerate slightly with each split. Powered splitters boost signals to their original strength from the source. Passive cable splitters can weaken TV signals, but not always noticeably.
Cable length and distance from the signal source are more likely to affect TV quality, in which case a powered cable splitter can usually fix the problem.
About the Author Bill Frost. By night, Bill cranks a Flying V with his band at the bar. Find out more about this cheap alternative to cable boxes. The best ways to avoid the cost of another cable box. Pros and cons of coaxial cable splitters. Cheap price Easy installation. No independent channel viewing Potential signal loss.
Are cable splitters right for you?
0コメント